DTC LOOKUP →
BASEBENZ · DTC DOSSIER CRIT: СРЕДНЯЯ

P0017

Рассинхронизация коленвала и выпускного распредвала (банк 1)

P0017 is a diagnostic trouble code indicating a correlation issue between the crankshaft position sensor and the camshaft position sensor on Bank 1, specifically for the exhaust camshaft. In the context of the M272 engine, it is often associated with balance shaft gear failure, but can also be caused by a stretched timing chain, a faulty camshaft adjuster, or a faulty camshaft position sensor.

Симптомы

Rough idling
Heavy fuel consumption
Check engine light

Возможные решения

Replace the exhaust camshaft adjuster if it is worn.
Adjust the exhaust camshaft timing by one tooth counterclockwise if the camshaft is retarded.
Replace the camshaft position sensor if it is faulty.
Replace the balance shaft if it is worn or failed.

Если не устранять

Typischer Eintrag bei Steuertrieb-Problemen; Zustand des einen Bauteils beeinflusst die Belastung des anderen (Zahnriemen/Steuerkette).

Типичный пробег появления

Codes now appearing after about 20 miles (per last reset)

БЛОК
Двигатель (ECM) · ГРМ
КРИТИЧНОСТЬ
Средняя
ШИНА ДАННЫХ
Силовой агрегат (двигатель / трансмиссия)
ХАРАКТЕРНО ДЛЯ
M272
ПОРЯДОК ПРОВЕРКИ
  1. 01Метки ГРМ
  2. 02натяжитель
  3. 03звёздочки
Прокрутить вверх